NIKKOKIZAI develops and provides high-efficiency cutting tools and parts, polishing tools, jigs, and measuring instruments at reasonable prices.
- Home >
- Original Products >
- End Mills PaNacea Coat Series, ATH Coat Series
End Mills PaNacea Coat SeriesEnd Mills ATH Coat SeriesEnd Mills Carbide Blue CoatingEnd Mills Epoch SD CoatingEnd Mills TARO SeriesEnd Mills HANAKO SeriesSuper-hard (3000 HV) heat-resistant coating with excellent abrasion resistance.
The PaNacea Coat Series is a lineup of universal tools that demonstrate high performance for a variety of metals ranging from carbon steel (annealed copper) to quenched steel (with a Rockwell hardness of up to 52 HRC).
Blade diameter tolerance:
0 to 0.02 / Helix angle: 30°
| Blade dia. | Blade length | Overall length | Haft dia. |
|---|---|---|---|
| 0.5 | 1.5 | 40 | 4 |
| 1.0 | 2.5 | 40 | 4 |
| 1.5 | 4.0 | 40 | 4 |
| 2.0 | 6.0 | 40 | 4 |
| 3.0 | 10.0 | 45 | 6 |
| 4.0 | 12.0 | 45 | 6 |
| 5.0 | 15.0 | 50 | 6 |
| 6.0 | 15.0 | 50 | 6 |
| 8.0 | 20.0 | 60 | 8 |
| 10.0 | 25.0 | 70 | 10 |
| 12.0 | 30.0 | 75 | 12 |
Blade diameter tolerance:
0 to 0.02 / Helix angle: 30°
| Blade dia. | Blade length | Overall length | Haft dia. |
|---|---|---|---|
| 3.0 | 10 | 45 | 6 |
| 4.0 | 12 | 45 | 4 |
| 4.0 | 12 | 45 | 6 |
| 5.0 | 15 | 50 | 6 |
| 6.0 | 15 | 50 | 6 |
| 8.0 | 20 | 60 | 8 |
| 10.0 | 25 | 70 | 10 |
| 12.0 | 30 | 75 | 12 |
R tolerance: 0±0.005
| R | Blade length | Overall length | Haft dia. |
|---|---|---|---|
| R0.3 | 1.1 | 40 | 4 |
| R0.5 | 2.5 | 50 | 4 |
| R0.75 | 4.0 | 50 | 4 |
| R1 | 5.0 | 50 | 4 |
| R1 | 5.0 | 50 | 6 |
| R1.5 | 8.0 | 70 | 3 |
| R1.5 | 8.0 | 70 | 6 |
| R | Blade length | Overall length | Haft dia. |
|---|---|---|---|
| R2 | 8 | 70 | 4 |
| R2 | 8 | 70 | 6 |
| R3 | 12 | 90 | 6 |
| R4 | 14 | 100 | 8 |
| R5 | 18 | 100 | 10 |
| R6 | 22 | 110 | 12 |
Newly developed coating consisting of nano-crystalline grains with improved lubricity without sacrificing wear and tear resistance.
The TH Coat Series demonstrates high performance for a variety of metals ranging from pre-hardened steel (40 HRS or harder) to quenched steel (annealed copper).
Blade diameter tolerance:
0 to 0.01 / Helix angle: 30°
| Blade dia. | Blade length | Overall length | Haft dia. |
|---|---|---|---|
| 0.5 | 1.5 | 40 | 4 |
| 1.0 | 2.5 | 40 | 4 |
| 1.5 | 4.0 | 40 | 4 |
| 2.0 | 6.0 | 40 | 4 |
| 3.0 | 10.0 | 45 | 6 |
| 4.0 | 12.0 | 45 | 6 |
| 5.0 | 15.0 | 50 | 6 |
| 6.0 | 15.0 | 50 | 6 |
| 8.0 | 20.0 | 60 | 8 |
| 10.0 | 25.0 | 70 | 10 |
| 12.0 | 30.0 | 75 | 12 |
Blade diameter tolerance:
0 to 0.01 / Helix angle: 30°
| Blade dia. | Blade length | Overall length | Haft dia. |
|---|---|---|---|
| 3.0 | 10 | 45 | 6 |
| 4.0 | 12 | 45 | 4 |
| 4.0 | 12 | 45 | 6 |
| 5.0 | 15 | 50 | 6 |
| 6.0 | 15 | 50 | 6 |
| 8.0 | 20 | 60 | 8 |
| 10.0 | 25 | 70 | 10 |
| 12.0 | 30 | 75 | 12 |
R tolerance: 0±0.005
| R | Blade length | Overall length | Haft dia. |
|---|---|---|---|
| R0.2 | 0.6 | 40 | 4 |
| R0.25 | 0.8 | 40 | 4 |
| R0.3 | 0.9 | 40 | 4 |
| R0.5 | 1.5 | 50 | 4 |
| R0.75 | 2.3 | 50 | 4 |
| R1 | 3 | 50 | 4 |
| R1 | 3 | 50 | 6 |
| R | Blade length | Overall length | Haft dia. |
|---|---|---|---|
| R1.5 | 4.5 | 70 | 3 |
| R1.5 | 4.5 | 70 | 6 |
| R2 | 6.0 | 70 | 4 |
| R2 | 6.0 | 70 | 6 |
| R3 | 9.0 | 100 | 6 |
| R4 | 12.0 | 100 | 8 |
| R5 | 15.0 | 100 | 10 |
| R6 | 18.0 | 110 | 12 |